DL4000P Dust Collector

The DL4000P dust collector has many of the same great features as the DL3000. The dust collector is the same size but has the added benefits of a reverse pulse compressor, and pass through power built into the machine.

Features

When using larger, more complex grinders and shot blasters, dust collectors with improved features increase run time and decrease down time on the job. The DL4000P is a 318 CFM, auto pulsing machine. In ‘work mode’ the machine is raised on it’s platform for the endless bag to do it’s job collecting dust. In ‘transport mode’ the dust collector is pushed down for easier transport and storage.

Hoses

The DL4000P dust collector comes with 2 different attachments hoses; a 50 mm and an 80 mm. All of the hoses that pair with this dust collector are anti-static. Also included with this machine are a hose connector, floor wand, floor brush, and 2 sizes of PVC anti-static hoses.

Controls

The controls have 3 switches for the indually controlled motors. This feature increases the versatility of this machine to be paired with multiple sizes of surface preparation equipment. The control panel also has a CFM meter. If this indicator is in the blue your filter and machine are functioning properly. If the indicator dips into the red, it is time to clean a filter or perform dust collector maintenance.

Power

A pass through electrical control panel on the DL4000P has a switch for main on/off, power, thermal indicator, and a switch to move between pass through sockets.  This machine allows either a 230V single phase machine or a 230V three phase machine to connect to the power box. Be sure to scan the stickers on the top of the control box to make sure you are properly connecting this machine to power.