Shot Blasting 101 – Charge your magnets!
Using a shot blaster to clean and profile concrete is an efficient way to prep concrete for an overlayment or coating. Shot blasters are easy
$25,373.99
MSRP:
The Rogue is an all-electric walk-behind scraper with innovative controls designed to improve safety, operator experience and removal rate. The infinitely adjustable scraper blade angle is National’s famous dual-lift brought into our smaller scrapers. It is designed to remove both hard and soft goods with simple toggle controls to control pitch and angle.
The Rogue also has a greatly increased travel speed, and fewer loose parts than other models. Innovative wheel hubs, click-in tooling, and adjustable blade vibration are a few of the features that really set this machine apart.
The adjustable orbital speed on this machine goes from 0-1900 RPMs. This feature allows you to run the machine with zero oscillation on the front end, giving you near-silent machine operation. The orbital range on this machine brings another adjustable element to your scraping.
The quick change tooling holder operates with a simple button on the side of the front end. click this button to release or insert a shank or blade holder. The grooved shaft on the shanks and blade holders and this simple button eliminate the loose parts when swapping tooling on most walk-behind scrapers.
Two thumb controls on the handles give the operator responsive, precision steering. Independently driven wheels increase maneuverability in tight spaces and increase operator control. The control panel also has a simple up/down button for on-the-go adjustments of the blade pitch and angle. Similar to National’s Dual-lift ride-on scrapers, this adjustment brings infinite blade adjustment to walk-behind scraping.
The Rogue scraper has built-in wheel de-couplers to put the machine into transport mode with no loose parts. National’s wheel scraper design has been upgraded on the Rogue to scrape effectively in both forward and reverse.
Front, middle, and side weights are removable and positionable. The Rogue scraper comes with 1 weight on each slide bar, and has capacity for 2 additional weights on each side. This modular machine is designed to be pulled apart and transported with ease.
Power Supply | Electric | |
Max. Width | 22.1″ | 56 cm |
Width (weights forward) | 19.4″ | 49 cm |
Max. Height | 45.3″ | 115 cm |
Height (handle folded) | 25.3″ | 64 cm |
Max. Length | 56.8″ | 114 cm |
Length (handle folded) | 41.4″ | 105 cm |
Weight | 466 lbs | 211.4 kg |
Removable Weight | 177 lbs | 80.3 kg |
Weight (machine only) | 289 lbs | 131.1 kg |
Speed | 3 – 150 ft/min | 0.9 – 45.7 m/min |
RPM | 600 – 2000 RPM | |
Voltage | 120 V | |
Frequency | 60 Hz | |
HP | Drive Motor – 1/3 HP (x2)Orbital Motor – 3/4 HP | |
Amps (full load) | 15 A |
Included with Rogue:
Call for pricing and availability
Ride On Scrapers
The Spartan 220 comes equipped with a specialty drum system designed to remove paint, thin mill coatings, line striping, carpet adhesives, and other refined applications.
$32,474.91
MSRP:
The DL6000P offers the convenience of two powerful dust collectors in one unit. Easily separate the units as needed or use together paired with National’s larger shot blasters and grinders. Designed to fit through standard doorways and telescope down for transportation, the versatile machine will fit into any fleet.
Width | 26″ | 63.5 cm |
Height | 79″ | 160 cm |
Length | 87″ | 98 cm |
Weight | 674 lb | 118 kg |
Voltage | 230 | |
Phase | Single | |
Frequency | 50/60 Hz | |
Vacuum Pressure | 98.4″ H2O | 2.5 m H2O |
Air Movement (Combined) | 508 CFM | 864 m3/hr |
Air Movement (Individual) | 318 CFM | 540 m3/hr |
Primary Filter Area | 122.7 sq ft | 114,000 sq cm |
Secondary Filter Area | 57.1 sq ft | 53,000 sq cm |
Filter Efficiency | 99.995 @ .14 microns | |
Noise Emission (dBA) | 80 | |
Inlet | 3.15″ | 80 mm |
$4,256.70
MSRP:
$5,676.01
MSRP:
$31.65
MSRP:
$20.56
MSRP:
$37.92
MSRP:
$47.53
MSRP:
$305.24
MSRP:
$55.99
MSRP:
$117.22
MSRP:
$8.06
MSRP:
Home » surface preparation » Page 3
Using a shot blaster to clean and profile concrete is an efficient way to prep concrete for an overlayment or coating. Shot blasters are easy
Shot blasting is a process used to clean, prepare, and restore floors. It involves propelling small steel beads (shot) at high velocity onto the floor
The day-to-day role of a facilities manager is to maintain a safe, efficient environment that meets the needs of employees and supports daily operations. With
Meet the Viking: National Flooring Equipment’s Most Powerful Ride-On Scraper for Outdoor Surface Preparation National Flooring Equipment, a global leader in surface preparation equipment, introduces
When selecting surface preparation equipment, contractors often consider the power source. For example, propane and battery-powered machines both have their merits. Propane fuelled machines don’t
According to the Annual Local Authority Road Maintenance (ALARM) survey by the Asphalt Industry Alliance, 1.7 million potholes were filled in 2021 — that’s equivalent
Proper surface preparation is vital for flooring projects to be successful. Often, contractors don’t recognize this and rush the prep by just sweeping the surface before laying the new coating. Because contractors know that the new surface is all the customer will see once work is complete, they tend to think this is the only thing that matters. They couldn’t be more wrong. Surface…
National Flooring Equipment
9250 Xylon Ave N
Minneapolis, MN 55445
Powered by Bush Marketing