Shot Blasting Archives - National Flooring Equipment

Blog

Looking for Parts & Products?

How does a shot blaster work?

When it comes to efficient and time-saving surface preparation, shot blasters are a great choice. These machines can clean, prep, and profile surfaces in a

Read

December 31, 2024

shot blaster cleaning and prepping a concrete floor

How Using a Shot Blaster Can Boost Your ROI on the Job

In the world of surface preparation, efficiency is key. Whether you’re a contractor working on large commercial spaces or handling smaller residential projects, time is

Read

November 13, 2024

Which vac do I need?

One of our most frequently asked questions is “Which vac do I need for my shot blaster?”. This question has come up more as OSHA

Read

September 23, 2024

When would you use an 8-inch shot blaster?

8-inch shot blasters are a great companion machine to larger equipment, and small enough to fit into tight spaces. This size machine is for small

Read

September 20, 2024

Is your shot blaster dropping shot?

Using a shot blaster to clean and prep a concrete floor for another coating is a popular method of surface prep. These machines have a

Read

July 26, 2024

What is Concrete Surface Profile (CSP)?

Concrete Surface Profile (CSP) refers to the texture or roughness of a concrete surface. It is an important measure in the preparation of concrete surfaces

Read

July 12, 2024

Meet your A95 Shot Blaster

National’s A95 shot blaster is an 8-inch manual machine. This shot blaster excels in small spaces, and weighs only 121lbs. This compact size and 110V

Read

July 12, 2024

How Does a Shot Blaster Work?

Using a shot blaster to prep a concrete floor is one of the most effective methods of surface preparation available. With very little cleanup after

Read

July 11, 2024

Shot Blasting 101 – Charge your magnets!

Using a shot blaster to clean and profile concrete is an efficient way to prep concrete for an overlayment or coating. Shot blasters are easy

Read

June 12, 2024

Shot Blasting 101: the A97 10-inch blaster

Shot blasting is a process used to clean, prepare, and restore floors. It involves propelling small steel beads (shot) at high velocity onto the floor

Read

June 7, 2024

In January 2020 we proudly launched our new series of shot blasters. The Apex series of machines represented an addition to the products that we manufacture in-house, and we are please to pass this innovation and quality along to our customers. Manufacturing in-house wasn’t new to us. We have proudly manufactured our walk-behind and ride-on scrapers for years, adding to their fun…

Read

May 5, 2020

;

Power Supply	Electric
Max. Width	22.1″	56 cm
Width (weights forward)	19.4″	49 cm
Max. Height	45.3″	115 cm
Height (handle folded)	25.3″	64 cm
Max. Length	56.8″	114 cm
Length (handle folded)	41.4″	105 cm
Weight	466 lbs	211.4 kg
Removable Weight	177 lbs	80.3 kg
Weight (machine only)	289 lbs	131.1 kg
Speed	3 – 150 ft/min	0.9 – 45.7 m/min
RPM	600 – 2000 RPM
Voltage	120 V
Frequency	60 Hz
HP	Drive Motor – 1/3 HP (x2) Orbital Motor – 3/4 HP
Amps (full load)	15 A

Width	26″	63.5 cm
Height	79″	160 cm
Length	87″	98 cm
Weight	674 lb	118 kg
Voltage	230
Phase	Single
Frequency	50/60 Hz
Vacuum Pressure	98.4″ H2O	2.5 m H2O
Air Movement (Combined)	508 CFM	864 m3/hr
Air Movement (Individual)	318 CFM	540 m3/hr
Primary Filter Area	122.7 sq ft	114,000 sq cm
Secondary Filter Area	57.1 sq ft	53,000 sq cm
Filter Efficiency	99.995 @ .14 microns
Noise Emission (dBA)	80
Inlet	3.15″	80 mm

Rogue Walk-Behind Floor Scraper – Next-Level Removal Performance

Features That Set Rogue Apart

Blog

Looking for Parts & Products?

Find products available in your country

Select your location: