When would you use an 8-inch shot blaster?
8-inch shot blasters are a great companion machine to larger equipment, and small enough to fit into tight spaces. This size machine is for small
$25,373.99
MSRP:
The Rogue is an all-electric walk-behind scraper with innovative controls designed to improve safety, operator experience and removal rate. The infinitely adjustable scraper blade angle is National’s famous dual-lift brought into our smaller scrapers. It is designed to remove both hard and soft goods with simple toggle controls to control pitch and angle.
The Rogue also has a greatly increased travel speed, and fewer loose parts than other models. Innovative wheel hubs, click-in tooling, and adjustable blade vibration are a few of the features that really set this machine apart.
The adjustable orbital speed on this machine goes from 0-1900 RPMs. This feature allows you to run the machine with zero oscillation on the front end, giving you near-silent machine operation. The orbital range on this machine brings another adjustable element to your scraping.
The quick change tooling holder operates with a simple button on the side of the front end. click this button to release or insert a shank or blade holder. The grooved shaft on the shanks and blade holders and this simple button eliminate the loose parts when swapping tooling on most walk-behind scrapers.
Two thumb controls on the handles give the operator responsive, precision steering. Independently driven wheels increase maneuverability in tight spaces and increase operator control. The control panel also has a simple up/down button for on-the-go adjustments of the blade pitch and angle. Similar to National’s Dual-lift ride-on scrapers, this adjustment brings infinite blade adjustment to walk-behind scraping.
The Rogue scraper has built-in wheel de-couplers to put the machine into transport mode with no loose parts. National’s wheel scraper design has been upgraded on the Rogue to scrape effectively in both forward and reverse.
Front, middle, and side weights are removable and positionable. The Rogue scraper comes with 1 weight on each slide bar, and has capacity for 2 additional weights on each side. This modular machine is designed to be pulled apart and transported with ease.
Power Supply | Electric | |
Max. Width | 22.1″ | 56 cm |
Width (weights forward) | 19.4″ | 49 cm |
Max. Height | 45.3″ | 115 cm |
Height (handle folded) | 25.3″ | 64 cm |
Max. Length | 56.8″ | 114 cm |
Length (handle folded) | 41.4″ | 105 cm |
Weight | 466 lbs | 211.4 kg |
Removable Weight | 177 lbs | 80.3 kg |
Weight (machine only) | 289 lbs | 131.1 kg |
Speed | 3 – 150 ft/min | 0.9 – 45.7 m/min |
RPM | 600 – 2000 RPM | |
Voltage | 120 V | |
Frequency | 60 Hz | |
HP | Drive Motor – 1/3 HP (x2)Orbital Motor – 3/4 HP | |
Amps (full load) | 15 A |
Included with Rogue:
Call for pricing and availability
Ride On Scrapers
The Spartan 220 comes equipped with a specialty drum system designed to remove paint, thin mill coatings, line striping, carpet adhesives, and other refined applications.
$32,474.91
MSRP:
The DL6000P offers the convenience of two powerful dust collectors in one unit. Easily separate the units as needed or use together paired with National’s larger shot blasters and grinders. Designed to fit through standard doorways and telescope down for transportation, the versatile machine will fit into any fleet.
Width | 26″ | 63.5 cm |
Height | 79″ | 160 cm |
Length | 87″ | 98 cm |
Weight | 674 lb | 118 kg |
Voltage | 230 | |
Phase | Single | |
Frequency | 50/60 Hz | |
Vacuum Pressure | 98.4″ H2O | 2.5 m H2O |
Air Movement (Combined) | 508 CFM | 864 m3/hr |
Air Movement (Individual) | 318 CFM | 540 m3/hr |
Primary Filter Area | 122.7 sq ft | 114,000 sq cm |
Secondary Filter Area | 57.1 sq ft | 53,000 sq cm |
Filter Efficiency | 99.995 @ .14 microns | |
Noise Emission (dBA) | 80 | |
Inlet | 3.15″ | 80 mm |
$4,256.70
MSRP:
$5,676.01
MSRP:
$31.65
MSRP:
$20.56
MSRP:
$37.92
MSRP:
$47.53
MSRP:
$305.24
MSRP:
$55.99
MSRP:
$117.22
MSRP:
$8.06
MSRP:
Home » surface preparation » Page 2
8-inch shot blasters are a great companion machine to larger equipment, and small enough to fit into tight spaces. This size machine is for small
For the average DIYer tile floors can be removed using simple tools like hammers, chisels, or prybars. When renovation or removal is your day job,
Using a shot blaster to clean and prep a concrete floor for another coating is a popular method of surface prep. These machines have a
Ride-on scrapers are highly efficient removal machines that reduce labor cost, increase productivity, and improve precision and control over the removal. Of the variety of
Concrete Surface Profile (CSP) refers to the texture or roughness of a concrete surface. It is an important measure in the preparation of concrete surfaces
National’s A95 shot blaster is an 8-inch manual machine. This shot blaster excels in small spaces, and weighs only 121lbs. This compact size and 110V
Using a shot blaster to prep a concrete floor is one of the most effective methods of surface preparation available. With very little cleanup after
Occasionally we receive phone calls from customers who own a ride-on scraper and have worn a flat spot onto their caster wheel. The primary reason
Scraping up a monolithic floor coating is tricky without the right tools. Types of monolithic floors include carpet, linoleum, vinyl, and rubber. This type of
The benefits of polishing a concrete floor are numerous. The end result is a high shine, easily cleaned surface that requires little maintenance. This type
Adequate dust collection in surface preparation is crucial. Pairing the right machine is a matter of health, safety, efficiency, and quality. Manufacturing standards for quality
There is no one-size-fits-all in surface preparation. Purchasing a floor removal machine to address every challenge you face is unrealistic, but National’s approach to product
National Flooring Equipment
9250 Xylon Ave N
Minneapolis, MN 55445
Powered by Bush Marketing