Surface Preparation Advice | National Flooring Equipment blog

When would you use an 8-inch shot blaster?

8-inch shot blasters are a great companion machine to larger equipment, and small enough to fit into tight spaces. This size machine is for small

Read

September 20, 2024

Scraping Tile Off the Floor

For the average DIYer tile floors can be removed using simple tools like hammers, chisels, or prybars. When renovation or removal is your day job,

Read

September 20, 2024

Which Concrete Polisher do I need?

Contractors have options when looking for a concrete polisher. Machine size, power, and features are important considerations in choosing a grinder. Polished floors have gained

Read

September 20, 2024

Which floor scraper do I need?

How to Choose the Right Floor Scraper for Your Fleet Floor scrapers have advanced significantly over the past few decades, offering a variety of power

Read

September 20, 2024

Is your shot blaster dropping shot?

Using a shot blaster to clean and prep a concrete floor for another coating is a popular method of surface prep. These machines have a

Read

July 26, 2024

Which ride-on scraper do I need?

Ride-on scrapers are highly efficient removal machines that reduce labor cost, increase productivity, and improve precision and control over the removal. Of the variety of

Read

July 26, 2024

What is Concrete Surface Profile (CSP)?

Concrete Surface Profile (CSP) refers to the texture or roughness of a concrete surface. It is an important measure in the preparation of concrete surfaces

Read

July 12, 2024

Meet your A95 Shot Blaster

National’s A95 shot blaster is an 8-inch manual machine. This shot blaster excels in small spaces, and weighs only 121lbs. This compact size and 110V

Read

July 12, 2024

How Does a Shot Blaster Work?

Using a shot blaster to prep a concrete floor is one of the most effective methods of surface preparation available. With very little cleanup after

Read

July 11, 2024

Scraper 101: Don’t get a Flat Wheel

Occasionally we receive phone calls from customers who own a ride-on scraper and have worn a flat spot onto their caster wheel. The primary reason

Read

July 3, 2024

Scraper 101: The Art of Ditching

Scraping up a monolithic floor coating is tricky without the right tools. Types of monolithic floors include carpet, linoleum, vinyl, and rubber. This type of

Read

July 3, 2024

Polished Concrete – Don’t Skip Steps!

The benefits of polishing a concrete floor are numerous. The end result is a high shine, easily cleaned surface that requires little maintenance. This type

Read

July 2, 2024

Power Supply	Electric
Max. Width	22.1″	56 cm
Width (weights forward)	19.4″	49 cm
Max. Height	45.3″	115 cm
Height (handle folded)	25.3″	64 cm
Max. Length	56.8″	114 cm
Length (handle folded)	41.4″	105 cm
Weight	466 lbs	211.4 kg
Removable Weight	177 lbs	80.3 kg
Weight (machine only)	289 lbs	131.1 kg
Speed	3 – 150 ft/min	0.9 – 45.7 m/min
RPM	600 – 2000 RPM
Voltage	120 V
Frequency	60 Hz
HP	Drive Motor – 1/3 HP (x2) Orbital Motor – 3/4 HP
Amps (full load)	15 A

Width	26″	63.5 cm
Height	79″	160 cm
Length	87″	98 cm
Weight	674 lb	118 kg
Voltage	230
Phase	Single
Frequency	50/60 Hz
Vacuum Pressure	98.4″ H2O	2.5 m H2O
Air Movement (Combined)	508 CFM	864 m3/hr
Air Movement (Individual)	318 CFM	540 m3/hr
Primary Filter Area	122.7 sq ft	114,000 sq cm
Secondary Filter Area	57.1 sq ft	53,000 sq cm
Filter Efficiency	99.995 @ .14 microns
Noise Emission (dBA)	80
Inlet	3.15″	80 mm

Rogue Walk-Behind Floor Scraper – Next-Level Removal Performance

Features That Set Rogue Apart

Blog

Looking for Parts & Products?

Find products available in your country

Select your location: