Helix Paint or Coating Removal
When it comes to using a grinder for paint or coating removal, there’s plenty to consider. Paired with a variety of tooling, the Helix® is the most versatile 110 volt grinder on the market. In this video, we discuss how to set your Helix® up to get the best results removing paint and coatings as well as your tooling options and the applications in which each option would work best.
What tooling should I use? Should I remove my weights? Should I use high or low speed? Don’t worry, we’ve got answers for you!
The Tooling
There’s plenty of options for an effective coating removal. Your choice depends on the material, the concrete underneath, and your end goal. Watch this video to see the results of four different types of tooling.
- 2-Up 1/2 Round PCDs are a great starting point. Don’t use if you don’t want your concrete profiled!
- Helix Scarifier Tooling will remove the coating and leave little to no profile on the concrete underneath. Make sure you test your concrete hardness so you know what to expect.
- 4-Up Micro PCDs have small contact points with the concrete which means more head pressure. Great for tougher removals and may profile the concrete.
- In the video, we used our 25- Grit Single Bar Metal Bond Diamonds as well with great results (the concrete was profiled underneath)
Machine Setup
Machine Speed: Low
Weights: Removed
When it comes to using your Helix for paint or coating removal attach your tooling directly to the grind and scrape plate.
Tip
If the paint or coating is really thick or tough, consider bolting your tooling to the grind and scrape plate.
Grinder coating removal isn’t as tough